Tecomet, Inc.
115 Eames Street
Wilmington, MA 01887

Toll Free: 888.287.0400
Phone: 978.642.2400
Fax: 978.658.4334
Email: sales@tecomet.com
Website: www.tecomet.com
Print Back
Double action handles give more power to cut pins up to 1/8" (3.2 mm).
Unit of Measure

Specifications

Length

 N/A 9-1/2 in

Maximum Capacity

 N/A 1/8 in3.2 mm

Features

 N/A Side Cutting

Made from Stainless Steel

Made from Stainless Steel

 N/A All of our wire cutters are engineered to meet the demanding needs of cutting rods, pins, cables and wires in the Operating Room. Jaws are made from the toughest specially-tempered tool steel or have tungsten carbide inserts.

More Cutting Power

More Cutting Power

 N/A Cutters designed with double action give you more cutting power and help absorb the shock of wire cutting. For the surgeon there is better control and less fatigue.

Most Extensive Selection

Most Extensive Selection

 N/A We offer more jaw and handle styles than any other instrument company.

Note on Carbide Instruments

Note on Carbide Instruments

 N/A Instruments with carbide inserts can be replaced, however, welded carbide jaws can not be replaced.

How to Use

How to Use

 N/A To achieve the best results when cutting wires and pins, follow these simple steps:
  • Choose the appropriate cutter for the wire diameter you want to cut.
  • Do not exceed the maximum capacity marked on each cutter.
  • Cut wire in the middle of the jaw-not on the tip or in the corner.
  • Keep the jaw at right angles to the piece being cut. Do not twist or turn cutter.

Caution

Caution

 N/A Be sure to protect patient and O.R. personnel from flying particles (especially the eyes). The harder the metal, the farther the pieces can fly.

Important Note on Maximum Capacities

Important Note on Maximum Capacities

 N/A Modern rods and pins vary greatly in hardness and tensile strength. All maximum capacities noted are based on tests using standard strength Tecomet® implant material. Cutting material which exceeds our standard strength ratings, such as certain high strength spinal rods, may damage or shorten the life of cutting edges and voids the instrument warranty.